Effect of molecular structure in branched polyethylene on adhesion properties with polypropylene
β Scribed by Masayuki Yamaguchi
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 242 KB
- Volume
- 70
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
Adhesion properties between branched polyethylene (PE) and isotactic polypropylene (PP) were studied by a peel test and scanning electron microscopy. In this study, two types of branched PEs were used; one is a linear low density polyethylene (LLDPE) and the other is a high pressure low density polyethylene (LDPE). The adhesive strength of the LLDPE/PP is much higher than that of LDPE/PP. Furthermore, the formation of PE influxes between PP spherulites has a small effect on the adhesion. The dynamic viscoelastic measurements for the binary blends composed of branched PE and PP were also carried out to estimate the interfacial tension by using a rheological emulsion model proposed by Palierne. The interfacial tension is 1.0 mN for LLDPE/PP and 2.1 mN for LDPE/PP, suggesting that the interfacial thickness of LLDPE/PP is about twice that of LDPE/PP. The adhesive strength between branched PE and PP will be determined by the interfacial thickness, which represents the entanglements between two polymers.
π SIMILAR VOLUMES
## Abstract To improve interaction between syndiotactic polypropylene (SPP) and fibrous cellulose (FC), effects of chemical structure of silane coupling agent on the reactivity for the surface hydroxyl group on the FC were studied by Xβray photoelectron spectroscopy (XPS) measurement. Among the thr
To enhance the thermal properties of ultrahigh molecular weight (UHMW) (viscosity-average molecular weight of 6 1 10 6 ) polyethylene (PE) gel film, this was crosslinked by dicumyl peroxide (DCP) during a high-temperature zone drawing, which is effective to orient film. Through a series of experimen