𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of microarc oxidation on the corrosion and mechanical behavior of cast aluminum alloys

✍ Scribed by L. S. Saakiyan; A. P. Efremov; A. I. Kapustnik

Publisher
Springer
Year
1990
Tongue
English
Weight
232 KB
Volume
26
Category
Article
ISSN
1573-885X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of chemical composition on the co
Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys
✍ Huang, Her-Hsiung πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 910 KB

## Abstract The objective of this investigation was to study the compositional influence on the corrosion behavior of Ni‐Cr‐Mo dental casting alloys in acidic artificial saliva. Cyclic potentiodynamic and potentiostatic tests were used to evaluate the corrosion behavior of different Ni‐Cr‐Mo dental

The effect of porous coating processing
The effect of porous coating processing on the corrosion behavior of cast Co–Cr–Mo surgical implant alloys
✍ Dr. J. J. Jacobs; R. M. Latanision; R. M. Rose; S. J. Veeck πŸ“‚ Article πŸ“… 1990 πŸ› Elsevier Science 🌐 English βš– 795 KB

## Abstract The manufacture of porous coated cobalt‐based surgical implant alloys requires sintering–a high temperature process above the incipient melting temperature of this alloy system. The metallurgical changes produced by the high temperature sinter cycle consist of dissolution of interdendri

The importance of wear and corrosion on
The importance of wear and corrosion on the fretting fatigue behavior of two aluminum alloys
✍ C.B Elliott III; D.W Hoeppner πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 367 KB

Research in the Quality and Integrity Design Engineering Center of the University of Utah was conducted to determine the relative Ε½ . importance of wear and corrosion oxidation failure mechanisms on the fretting fatigue behavior of 8090-T7 and 7075-T7351 aluminum Ε½ . alloy specimens. Specimens were