𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites

✍ Scribed by R.N. Rao; S. Das

Publisher
Elsevier Science
Year
2010
Weight
957 KB
Volume
31
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Wear behaviour of aluminium alloy and it
Wear behaviour of aluminium alloy and its composites reinforced by SiC particles using statistical analysis
✍ Y Sahin πŸ“‚ Article πŸ“… 2003 πŸ› Elsevier Science βš– 178 KB

The wear behaviour of SiCp-reinforced aluminium composite produced by the molten metal mixing method was investigated by means of a pin-on-disc type wear rig. Abrasive wear tests were carried out on 5 vol.% SiCp and its matrix alloy against SiC and Al O emery papers on a steel counterface at a fixed

Wear coefficient and reliability of slid
Wear coefficient and reliability of sliding wear test procedure for high strength aluminium alloy and composite
✍ R.N. Rao; S. Das πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science βš– 587 KB

This paper describes the results of dry sliding wear tests of aluminium alloy (Al-Zn-Mg-Cu) composite was examined under varying applied pressures (0.2-2.6 MPa) and sliding speeds of 0.52, 1.72, 3.35, 4.18 and 5.23 m/s. The wear behaviour was studied using pin-on-disc apparatus against heat-treated