Syracuse University has recently been engaged in studies pertaining to the low-cycle controlled strain fatigue behavior of steel and aluminum alloys. Axial tension-ompression and bend cycling fatigue tests were utilized to investigate the effects of a number of parameters including mean strain, stre
Effect of low-cycle fatigue on behavior of paint coatings
β Scribed by Yu. I. Podgornyi; L. N. Khokhlova; Yu. G. Ozhiganov
- Publisher
- Springer
- Year
- 1978
- Tongue
- English
- Weight
- 190 KB
- Volume
- 13
- Category
- Article
- ISSN
- 1573-885X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
An investigation was conducted on HY-80 steel to show how low-cycle fatigue life is influenced by imposition of various stresses prior to fatigue testing. One cycle of static prestress was imposed on each specimen at loads either above or below the yield strength of the material and fatigue testing
Fretting-fatigue behavior and damage accumulation under a variable-amplitude cycling load is investigated in a conΓΏguration involving a cylindrical indenter in contact with ΓΏnite width plate. Relative magnitudes of cyclic tangential and bulk loads not only a ect the contact conditions, but also thei
Low-cycle fatigue tests have been carried out on annealed commercially pure titanium under strain-controlled conditions. The relation between a plastic strain range and a number of cycles to failure obeyed Manson-Coffin's rule. The initiation of fatigue cracks was observed successively with the aid