๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effect of injection molding process parameters on optical properties of lenses

โœ Scribed by Tsai, Kuo-Ming

Book ID
115355955
Publisher
The Optical Society
Year
2010
Tongue
English
Weight
823 KB
Volume
49
Category
Article
ISSN
1559-128X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of powders and binders on materia
Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding process
โœ Seokyoung Ahn; Seong Jin Park; Shiwoo Lee; Sundar V. Atre; Randall M. German ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 527 KB

## Computer simulation Iron and steel powders It is essential to study and optimize multiple objective functions such as binder system design, feedstock, part geometry, mold design, and processing conditions in order to develop a successful powder injection molding process. A powder with different

Optical properties of injection-molded p
Optical properties of injection-molded polystyrene scintillators. I. Processing and optical properties
โœ J. A. Martins; J. Seixas; J. Silva; V. Esteves; M. J. Oliveira; J. Gomes; A. Mai ๐Ÿ“‚ Article ๐Ÿ“… 2003 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 148 KB ๐Ÿ‘ 2 views

## Abstract Scintillating tiles for the Tilecal/Atlas calorimeter can be produced by injection molding, an alternative to mold casting via __in situ__ polymerization. This new production method, which leads to a much faster production rate, introduces a number of additional variables that affect th

Effect of Processing Parameters on the M
Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams
โœ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 356 KB ๐Ÿ‘ 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care