𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of in situ synthesized macroactivator on morphology of PA6/PS blends via successive polymerization

✍ Scribed by Aihua Pei; Andong Liu; Tingxiu Xie; Guisheng Yang

Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
737 KB
Volume
105
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Blends of Immiscible Polystyrene/Polyami
Blends of Immiscible Polystyrene/Polyamide 6 via Successive In-Situ Polymerizations
✍ Aihua Pei; Andong Liu; Tingxiu Xie; Guisheng Yang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 534 KB

## Abstract **Summary:** A novel method has been successfully developed to prepare binary blends of PS and MCPA6. The blends are formed by the radical polymerization of styrene in CL, followed by the in‐situ anionic ring‐opening polymerization of CL in the presence of PS. The phase morphology inves

Synthesis and properties of SMA-g-PA6 an
Synthesis and properties of SMA-g-PA6 and PPO blends via in situ active anionic polymerization of ε-caprolactam, comparing with MCPA6/PPO blends
✍ Libo Du; Guisheng Yang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 528 KB

## Abstract In this work, blends of monomer casting polyamide 6 (MCPA6) and poly(phenylene oxide) (PPO) were prepared by __in situ__ polymerization via the application of ε‐caprolactam as a reactive solvent. Styrene‐maleic anhydride (SMA) was used as both compatibilizer and macromolecular activator

Polystyrene/bisphenol a polycarbonate (P
Polystyrene/bisphenol a polycarbonate (PS/PC) molecular composite by in situ polymerization. II. Effect of different molecular size of PC on the blending behavior and properties
✍ Lee Wook Jang; Dong Choo Lee 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 319 KB 👁 3 views

## Abstract The influences of different molecular sizes and contents of bisphenol A polycarbonate (PC) on the miscibility, morphology, and physical properties of a polystyrene/PC (PS/PC) molecular composite are examined. The polymerization of the matrix monomer, styrene, which is completely miscibl

Effect of composition and processing con
Effect of composition and processing conditions on the chemical and morphological evolution of PA-6/EPM/ EPM-g-MA blends in a corotating twin-screw extruder
✍ A. V. Machado; J. A. Covas; M. Walet; M. Van Duin 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 642 KB

## Abstract This study investigated the effect of blend composition and processing conditions on the chemical conversion and morphological evolution of PA‐6/EPM/EPM‐__g__‐MA blends along a twin‐screw extruder. The maleic anhydride (MA) content of the modified rubber was found to decrease strongly,