## Abstract The effect of wood species on the mechanical and thermal properties of wood–plastic composites (WPCs) was explored. Various wood species, including cherry, sweet gum, hickory, yellow poplar, Osage orange, walnut, eastern red cedar, pine, maple, and red oak, were compounded with virgin i
Effect of hydro-thermal treatment of green beech wood on its chemical and physco-mechanical properties
✍ Scribed by R. Babicki; T. Grzeczyński; H. Wróblewska
- Publisher
- Springer
- Year
- 1977
- Tongue
- English
- Weight
- 326 KB
- Volume
- 11
- Category
- Article
- ISSN
- 0043-7719
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
This study evaluated the effects of boron impregnation and heat treatment on the chemical and mechanical properties of wood. Sugi (Cryptomeria japonica D. Don) sapwood specimens treated with either boric acid (BA) or di-sodium octoborate tetrahydrate (DOT) solutions were exposed to heat treatments a
Polypropylene/wood fiber composites were prepared at three different temperatures: 170ЊC, 180ЊC, and 190ЊC. The surface of wood fibers was modified through the use of silane coupling agents and/or coating with polypropylene or maleated polypropylene. The fiber coating was performed by propylene poly
Removal of cells may decrease the antigenicity and risk of disease transmission associated with tendon allografts and xenografts. An ideal cell removal method would not compromise graft structure and mechanical properties. This study compared the effects of three extraction chemicals [t-octyl-phenox
This article addresses the effect of thermal aging on unreinforced and glassreinforced recycled polyamide 66. As an accelerated test, injection-molded test bars were aged at 110, 140, and 170ЊC for up to 4000 h in air to simulate service life. FTIR spectroscopy demonstrated that the oxidative degrad