✦ LIBER ✦

Effect of hot-rolling conditions on the physical properties of a carbon steel

✍ Scribed by J.R. Freeman Jr.; A.T. Derry

Publisher: Elsevier Science
Year: 1925
Tongue: English
Weight: 101 KB
Volume: 199
Category: Article
ISSN: 0016-0032
DOI: 10.1016/s0016-0032(25)91053-8

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of hot rolling condition on the d

Effect of hot rolling condition on the development of textures in ultra low carbon steel

✍ Y.B. Park; D.N. Lee; G. Gottstein 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 399 KB

The development of hot and cold rolling textures in Ti-bearing ultra low carbon steel has been investigated laying emphasis on effects of various processing parameters such as slab reheating temperature, hot rolling temperature, partition of hot rolling and cold rolling reductions. {225}<554>, {001}

The effect of controlled cooling after h

The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod

✍ M Kazeminezhad; A Karimi Taheri 📂 Article 📅 2003 🏛 Elsevier Science ⚖ 906 KB

In this research, the effects of different cooling conditions after hot rolling in Stelmor conveyor line on the mechanical properties of a commercial high carbon steel wire rod are investigated. By opening and closing the lids, turning on and off the fans in Stelmor system, an air patenting process

The effect of warm rolling on the struct

The effect of warm rolling on the structure and properties of a low-carbon steel

✍ D.N. Hawkins; A.A. Shuttleworth 📂 Article 📅 1979 🏛 Elsevier Science ⚖ 981 KB

Physical simulation of hot rolling in th

Physical simulation of hot rolling in the ferrite range of steels

✍ H. Groβheim; K. Schotten; W. Bleck 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 549 KB

Effect of carbide properties of roll mat

Effect of carbide properties of roll materials on lubricity in cold sheet rolling of low-carbon steel

✍ Yasuhiro Jimbo; Akira Azushima 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 742 KB

Prediction of carbon segregation on the

Prediction of carbon segregation on the surface of continuously annealed hot-rolled LCAK steel

✍ A. Chattopadhyay; K.C. Hari Kumar; V. Subramanya Sarma; B.S. Murty; D. Bhattacha 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 491 KB

An attempt has been made to predict the segregation of carbon in continuously annealed hot-rolled low-carbon aluminum-killed steel (LCAK) through thermodynamic calculations. It is found that the surface carbon content calculated by the Guttmann model is comparable with the experimental results for i