𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of helix angle of spirally corrugated tube on condensation heat transfer characteristics

✍ Scribed by Min Yu; Ying Guo; Mo Yang; Mei Lu

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
334 KB
Volume
37
Category
Article
ISSN
1099-2871

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Spirally corrugated tubes with different helix angles have been used in experiments on the characteristics of condensation heat transfer and flow resistance. The result of the experimentation shows that the helix angle plays a vital part in the spirally corrugated tube during the process of condensation heat transfer. This paper analyzes the mechanism of how the helix angle influences the characteristics of condensation heat transfer and flow resistance, and presents an experimental correlation formula of condensation heat transfer which takes the helix angle into account as a factor. Β©2008 Wiley Periodicals, Inc. Heat Trans Asian Res, 37(5): 275–282, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/htj.20208

πŸ“œ SIMILAR VOLUMES

Heat transfer characteristics in a conde
Heat transfer characteristics in a condenser of closed two-phase thermosyphon: Effect of entrainment on heat transfer deterioration
✍ Hiroyuki Hashimoto; Fumito Kaminaga πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 165 KB

## Abstract Condensation heat transfer in a closed two‐phase thermosyphon is experimentally examined using two different types of test section. Test Section 1 is a straight‐pipe‐type thermosyphon, whereas Test Section 2 has a large‐diameter evaporator compared with a condenser to minimize entrainme

Experimental studies on heat transfer en
Experimental studies on heat transfer enhancement of the inside and outside spirally triangle finned tube with small spiral angles for high-pressure preheaters
✍ Lijun Wang; Da-Wen Sun; Ping Liang; Lixian Zhuang; Yingke Tan πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 137 KB πŸ‘ 3 views

A new heat transfer enhanced tube\*the inside and outside spirally triangle "nned tube with small spiral angles (IOSTF tube)\*was developed and manufactured for improving the performance of high-pressure preheaters. The triangle #utes with small spiral angle on the outside surface of the IOSTF tube

Fluid flow and heat transfer characteris
Fluid flow and heat transfer characteristics of cone orifice jet (effects of cone angle)
✍ Mizuki Kito; Toshihiko Shakouchi; Koichi Tsujimoto; Toshitake Ando πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 370 KB

## Abstract The use of a jet from an orifice nozzle with a saddle‐backed‐shape velocity profile and a contracted flow at the nozzle exit may improve the heat transfer characteristics on an impingement plate because of its larger centerline velocity. However, it requires more power to operate than a