𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of heat treatment on microstructure and mechanical properties of directionally solidified superalloy DZ12

✍ Scribed by Jinxia Song; Dingzhong Tang; Chengbo Xiao; Dinggang Wang; Qian Yu

Publisher
Nonferrous Metals Society of China
Year
2011
Tongue
English
Weight
728 KB
Volume
30
Category
Article
ISSN
1001-0521

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of cooling rate on solidified mic
Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy
✍ L.Y. Zhang; Y.H. Jiang; Z. Ma; S.F. Shan; Y.Z. Jia; C.Z. Fan; W.K. Wang πŸ“‚ Article πŸ“… 2008 πŸ› Elsevier Science 🌐 English βš– 561 KB

A fast-cooling technology using a copper mould cooled by a phase-transition medium was used to prepare cast aluminium-A356 alloy by solidification of the melt. The cooling rate achieved with this technique is in the order of 10 2 K/s. As-cast samples with a diameter of 10 mm were produced. The micro

Influence of heat treatment on microstru
Influence of heat treatment on microstructure and mechanical properties of iron-based coating
✍ Li Hua-yi; Li Guo-lu; Wang Hai-dou; Xu Bin-shi πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science βš– 649 KB

Iron-based alloys were deposited on the low carbon steel by plasma cladding process. Furnace annealing was conducted at 600 Β°C for 40 min. Resulting microstructure and phases were observed and investigated by scanning electron microscopy (SEM), energy-dispersive spectrometer (EDS) and X-ray diffract