✦ LIBER ✦

Effect of glass fiber length on the creep and impact resistance of reinforced thermoplastics

✍ Scribed by Edward M. Silverman

Publisher: Society for Plastic Engineers
Year: 1987
Tongue: English
Weight: 984 KB
Volume: 8
Category: Article
ISSN: 0272-8397
DOI: 10.1002/pc.750080103

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Short-fiber-reinforced thermoplastics. P

Short-fiber-reinforced thermoplastics. Part III: Effect of fiber length on rheological properties and fiber orientation

✍ A. Vaxman; M. Narkis; A. Siegmann; S. Kenig 📂 Article 📅 1989 🏛 Society for Plastic Engineers 🌐 English ⚖ 801 KB

Effects of fiber length and orientation

Effects of fiber length and orientation distribution on the elastic modulus of short fiber reinforced thermoplastics

✍ Wei-Kuo Chin; Hsin-Tzu Liu; Yu-Der Lee 📂 Article 📅 1988 🏛 Society for Plastic Engineers 🌐 English ⚖ 641 KB

Pineapple leaf fiber reinforced thermopl

Pineapple leaf fiber reinforced thermoplastic composites: Effects of fiber length and fiber content on their characteristics

✍ Rungsima Chollakup; Rattana Tantatherdtam; Suchada Ujjin; Klanarong Sriroth 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 767 KB

Effect of fiber tension on the unwinding

Effect of fiber tension on the unwinding resistance of hardening layers of glass-reinforced plastic

✍ I. L. Kats; L. L. Sachkovskaya; G. E. Mishenznikov 📂 Article 📅 1976 🏛 Springer US 🌐 English ⚖ 332 KB

Effects of fiber length and orientation

Effects of fiber length and orientation on elasticity of fiber-reinforced plywood

✍ Heng Xu; Tetsuya Nakao; Chiaki Tanaka; Masahiro Yoshinobu; Hiroyuki Katayama 📂 Article 📅 1998 🏛 Springer 🌐 English ⚖ 527 KB

Short-term flexural creep behavior and m

Short-term flexural creep behavior and model analysis of a glass-fiber-reinforced thermoplastic composite leaf spring

✍ C. Subramanian; S. Senthilvelan 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 627 KB

## Abstract Present work investigated the short‐term flexural creep performance of fiber reinforced thermoplastic injection molded leaf springs. Unreinforced polypropylene, 20 wt % short and 20 wt % long glass fiber reinforced polypropylene materials were injection‐molded into constant thickness va