𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of dose rate on emulsion and microemulsion polymerization of styrene

✍ Scribed by Xiangling Xu; Zhicheng Zhang; Xuewu Ge; Manwei Zhang


Publisher
John Wiley and Sons
Year
1998
Tongue
English
Weight
150 KB
Volume
36
Category
Article
ISSN
0887-624X

No coin nor oath required. For personal study only.

✦ Synopsis


Emulsion and microemulsion polymerization of styrene were initiated with a gamma ray to study the effect of dose rate on polymerization. In both systems, there is an apparent plateau of polymerization rate in the curve of reaction rate vs. conversion. It was shown that emulsion polymerization conformed to the Smith-Ewart theory very well. Changing the dose rate in interval 2 had no great influence on polymerization rate, but it changed the average lifetime of radicals in polymer particles and affected the molecular weight of polymer produced. For microemulsion polymerization it was assumed that in the plateau it is the number of growing polymer particles being kept constant, not the number of polymer particles. When the dose rate was changed while the polymerization came into the constant period, the polymerization rate and the molecular weight of the polymer varied with the dose rate.


πŸ“œ SIMILAR VOLUMES


Emulsion polymerization of tetrafluoroet
✍ C. U. Kim; J. M. Lee; S. K. Ihm πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 366 KB πŸ‘ 2 views

The emulsion polymerization of tetrafluoroethylene (TFE) was carried out in a semibatch reactor using a chemical initiator (ammonium persulfate) and a fluorinated surfactant (FC-143). The effects of the reaction condition were investigated though the polymerization rate, molecular weight of polytetr

Microemulsion and conventional emulsion
✍ G. V. Ramana Reddy; N. Gayathri Devi; Jayakishore Panda πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 448 KB πŸ‘ 1 views

## Abstract The microemulsion (M.E.) and conventional emulsion (C.E.) copolymerizations of styrene (STY) with methyl methacrylate (MMA) are carried out at 70Β°C by employing __n__‐pentanol (PA) and __n__‐octanol (OA), respectively, as cosurfactants along with sodium lauryl sulfate (SLS), as surfacta

Emulsifier-free emulsion polymerization
✍ Naser Sharifi-Sanjani; Morteza Soltan-Dehghan; Nader Naderi; Ali Ranji πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 310 KB πŸ‘ 2 views