๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effect of dilute and dense phase operating conditions on bed-to-wall heat transfer mechanism in a circulating fluidized bed combustor

โœ Scribed by G. Nirmal Vijay; B.V. Reddy


Book ID
108141005
Publisher
Elsevier Science
Year
2005
Tongue
English
Weight
192 KB
Volume
48
Category
Article
ISSN
0017-9310

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Numerical modeling of axial bed-to-wall
โœ Nirmal V. Gnanapragasam; Bale V. Reddy ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 478 KB

The water-wall surfaces located above the secondary air inlet within the circulating fluidized bed (CFB) combustor are exposed to the axial bed-to-wall heat transfer process. In the current work, the axial bedto-wall heat transfer coefficients are estimated for three different axial voidage profiles

Suspension-to-wall heat transfer in a 12
โœ M. R. Golriz ๐Ÿ“‚ Article ๐Ÿ“… 1996 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 625 KB

An experimental investigation was carried out to study the effects of operating parameters on the local suspensionto-wall heat transfer in the combustor of a 12-MWt, circulating fluidized-bed (CFB) boiler. The heat transfer coefficients were measured with a conduction-type heat flux meter at five di

Effect of lateral and extended fins on h
โœ B.V. Reddy; P.K. Nag ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 571 KB

Abstract~Experimental investigations are made in a hot circulating fluidized bed unit to study the effect of lateral, and lateral and extended fins together on heat transfer coefficient and on the rate of heat transfer. The circulating fluidized bed (CFB) unit consists of a riser column of 102 x 102