✦ LIBER ✦

Effect of cyclic stress reduction on high temperature creep characteristics of solid solution Al−2·9 wt-%Mg alloy

✍ Scribed by Abd El-Rehim, A. F.; Mahmoud, M. A.

Book ID: 127231850
Publisher: Institute of Materials, Minerals and Mining
Year: 2011
Tongue: English
Weight: 285 KB
Volume: 27
Category: Article
ISSN: 0267-0836
DOI: 10.1179/174328409x453154

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress dependence of creep mechanism of

Stress dependence of creep mechanism of an Al-2wt%Mg alloy at high temperature

✍ Gobran, N. K. ;Mansy, F. M. 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 141 KB

Effect of cyclic stress on the high temp

Effect of cyclic stress on the high temperature creep behavior of AlMg alloys

✍ Yang, Zhi'an; Wang, Zhirui; Hu, Xiaobo; Wang, Zhongguang 📂 Article 📅 1993 🏛 Elsevier Science ⚖ 983 KB

Effect of cyclic stress reduction on the

Effect of cyclic stress reduction on the creep behaviour of Al-40 wt%Zn alloy

✍ F. Abd El-Salam; A.M. Abd El-Khalek; R.H. Nada 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 306 KB

Effect of cold-work on the mechanism con

Effect of cold-work on the mechanism controlling the high-temperature creep in Al−2 wt% Mg

✍ Mahmoud, S. A. ;Georgy, K. H. ;Mansy, F. M. ;Kamel, R. 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 264 KB

Effects of stress amplitude and internal

Effects of stress amplitude and internal stress on the grain boundary deformation behavior under high temperature creep in an Al-2.9%Mg alloy

✍ Sang Ho Na; Myung Seung Yang; Soo Woo Nam 📂 Article 📅 1995 🏛 Elsevier Science ⚖ 438 KB

Effect of Cu concentration on the high-t

Effect of Cu concentration on the high-temperature creep behavior of AlCu solid solution alloys

✍ M.S. Soliman 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 703 KB

The creep behavior of Al-Cu alloys containing 2 and 4 wt.% Cu was investigated at a temperature of 813 K and over a stress range of 0.5-10 MPa. The present results, along with previous data on Al-Cu alloy, suggest the presence of three regions of deformations: region I at low stresses, region II at