𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of cooling system on the polymer temperature and solidification during injection molding

✍ Scribed by Hamdy Hassan; Nicolas Regnier; Cedric Lebot; Cyril Pujos; Guy Defaye

Book ID
108058019
Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
608 KB
Volume
29
Category
Article
ISSN
1359-4311

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of Melt and Mold Temperatures on
Effect of Melt and Mold Temperatures on the Solidification Behavior of HDPE during Gas-Assisted Injection Molding: An Enthalpy Transformation Approach
✍ Bin Yang; Xiao-Rong Fu; Wei Yang; Shui-Po Liang; Nan Sun; Sheng Hu; Ming-Bo Yang πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 532 KB

## Abstract The influence of melt and mold temperature on the solidification behavior of HDPE during the GAIM process is studied using a transient‐heat‐transfer model of the enthalpy transformation approach. An in situ measurement of temperature decay in the mold cavity was carried out to verify th

The Use of the Indentation Test for Stud
The Use of the Indentation Test for Studying the Solidification Behaviour of Different Semicrystalline Polymers during Injection Molding
✍ Vincenzo La Carrubba; Wouter GabriΓ«lse; Stefano Piccarolo πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 277 KB

## Abstract **Summary:** An in‐line method for monitoring the solidification process during injection molding of semicrystalline polymers (demonstrated previously in __J. Appl. Polym. Sci.__ **2003**, __89__, 3713) is based on a simple device, where an additional ejector pin is pushed on the inject

Effects of cooling time and mold tempera
Effects of cooling time and mold temperature on quality of moldings with precision contour
✍ S. Y. Yang; L. Lien πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 595 KB

Injection molding is now used to mold plastic parts with precision contours such as lenses. Cooling conditions have critical effects on the quality and productivity of such precision parts. This article is devoted to investigate the effects of mold temperature and cooling time on quality. A two-cavi