✦ LIBER ✦

Effect of cooling rate on microstructure and mechanical properties of rapidly solidified Al-based bulk alloys

✍ Scribed by Longchao Zhuo; Shujie Pang; Hui Wang; Tao Zhang

Book ID: 116606594
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 823 KB
Volume: 504
Category: Article
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2010.03.211

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and mechanical properties

Microstructure and mechanical properties of rapidly solidified Al-Cr alloys

✍ Guofa Mi; Yalin Mo; Kuangfei Wang 📂 Article 📅 2009 🏛 Wuhan University of Technology 🌐 English ⚖ 618 KB

Microstructures and mechanical propertie

Microstructures and mechanical properties of rapidly solidified high strength Al–Ni based alloys

✍ J.Q Guo; K Ohtera 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 907 KB

Effect of cooling rate and Y element on

Effect of cooling rate and Y element on the microstructure of rapidly solidified TiAl alloys

✍ Z.G. Liu; L.H. Chai; Y.Y. Chen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 463 KB

Effect of cooling rate on solidified mic

Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy

✍ L.Y. Zhang; Y.H. Jiang; Z. Ma; S.F. Shan; Y.Z. Jia; C.Z. Fan; W.K. Wang 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 561 KB

A fast-cooling technology using a copper mould cooled by a phase-transition medium was used to prepare cast aluminium-A356 alloy by solidification of the melt. The cooling rate achieved with this technique is in the order of 10 2 K/s. As-cast samples with a diameter of 10 mm were produced. The micro

Cooling rate and microstructure of rapid

Cooling rate and microstructure of rapidly solidified Al–20 wt.% Si alloy

✍ C.L. Xu; H.Y. Wang; F. Qiu; Y.F. Yang; Q.C. Jiang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 311 KB

The microstructure and properties of rap

The microstructure and properties of rapidly solidified AlHf alloys

✍ A.F. Norman; P. Tsakiropoulos 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 421 KB

AI-Hf alloys were produced by chill casting and gas atomization. The solid solubility of hafnium in aluminium was extended to 2 wt.% Hf in the sub 45/zm size powders. Precipitation of the L12-AI3Hf phase refined the chill cast grain size from 300 /zm to 5 /~m. The powders were consolidated by extrus