✦ LIBER ✦

Effect of cold rolling on microstructure and material properties of 5052 alloy sheet produced by continuous casting

✍ Scribed by Hanliang Zhu; A.K. Ghosh; K. Maruyama

Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 498 KB
Volume: 419
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.12.008

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of fine-grained raw material addi

Effect of fine-grained raw material addition on microstructure refinement and tensile properties in horizontal continuous casting Al–12%Si alloy billets

✍ Jing Zhang; Suk Bong Kang; Huashun Yu; Jae Hyung Cho; Guanghui Min; Vladimir Y. 📂 Article 📅 2011 🏛 Elsevier Science ⚖ 870 KB

Effect of sintering temperature on micro

Effect of sintering temperature on microstructure and mechanical properties of highly porous silicon nitride ceramics produced by freeze casting

✍ Feng Ye; Jingyi Zhang; Haijiao Zhang; Limeng Liu 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 481 KB

Highly porous Si 3 N 4 with macroscopically aligned pores were prepared by the unidirectional freeze casting process using liquid N 2 as refrigerant. The increased sintering temperature had no obvious influence on the porosity, but significantly promoted ␣ → ␤-Si 3 N 4 phase transformation and the g

Effects of heat treatment on microstruct

Effects of heat treatment on microstructure and mechanical properties of twin roll casted Al–5.5Mg–0.02Ti alloy

✍ Sanjeev Das; N.S. Lim; H.W. Kim; C.G. Park 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 768 KB