𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of Chain Extenders on the Morphology Development in Flexible Polyurethane Foam

✍ Scribed by Li, Wu; Ryan, Anthony J.; Meier, Ingrid K.

Book ID
120467276
Publisher
American Chemical Society
Year
2002
Tongue
English
Weight
93 KB
Volume
35
Category
Article
ISSN
0024-9297

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of composition of polyurethane fo
Effect of composition of polyurethane foam template on the morphology of silicalite foam
✍ Yun-Jo Lee; Kyung Byung Yoon πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 712 KB

Two different types of polyurethane foam, namely, polyether polyol-based polyurethane (Ether-PUF) and polyester polyol-based polyurethane (Ester-PUF) were tested as the templates for the synthesis of silicalite foams. Both types of polyurethane foam readily produced corresponding silicalite foams (E

Effect of toluene diisocyanate index on
Effect of toluene diisocyanate index on morphology and physical properties of flexible slabstock polyurethane foams
✍ Dimitrios V. Dounis; Garth L. Wilkes πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 416 KB πŸ‘ 2 views

The effect of toluene diisocyanate (TDI) index on the physical properties, structure, and morphology of flexible slabstock polyurethane foams was investigated. Foams based on a 2700 molecular weight triol, 6 pph water, and varying amounts of an 80/20 mixture of 2,4-and 2,6-TDIs were characterized us

Effect of curing moisture on the indenta
Effect of curing moisture on the indentation force deflection of flexible polyurethane foam
✍ Haifeng Ni; Chee Keong Yap; Yan Jin πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 159 KB

## Abstract The moisture effect on the indentation force deflection (IFD) of flexible polyurethane foam was examined through the curing of the foam with different moisture contents. The employed foam was cured at 30, 40, 50, 60, 70, and 80% relative humidity, and the corresponding curing temperatur