𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of carbon nanotube-supported β nucleating agent on the thermal properties, morphology, and mechanical properties of polyamide 6/isotactic polypropylene blends

✍ Scribed by Jie Li; Shi-Wei Wang; Ke-Jun Zhan; Wei Yang; Bang-Hu Xie; Ming-Bo Yang

Publisher
John Wiley and Sons
Year
2011
Tongue
English
Weight
337 KB
Volume
124
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of calcium carbonate on the mecha
Effect of calcium carbonate on the mechanical and thermal properties of isotactic polypropylene/ethylene vinyl acetate blends
✍ Mustafa Öksüz; Hüseyin Yıldırım 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 385 KB 👁 1 views

## Abstract The effect of calcium carbonate (CaCO~3~) on the mechanical properties (with heat treatment) and thermal properties of polypropylene and isotactic polypropylene (i‐PP)/ethylene vinyl acetate (EVA) blends was investigated. CaCO~3~, in five different concentrations (3, 6, 9, 12l, and 15 w

Effects of polyphenylene oxide content o
Effects of polyphenylene oxide content on morphology, thermal, and mechanical properties of polyphenylene oxide/polyamide 6 blends
✍ Yulin Li; Tingxiu Xie; Guisheng Yang 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 442 KB 👁 2 views

## Abstract A series of composites of PPO/PA 6 with improved toughness were synthesized by using ε‐caprolactam as a reactive solvent. Inserting minor PPO macromolecules (1–3 wt %) into PA 6 matrix obviously reduced the crystallinity of PA6. Two crystallization temperatures were found when 6 wt % PP

The effect of multiwalled carbon nanotub
The effect of multiwalled carbon nanotube dimensions on the morphology, mechanical, and electrical properties of melt mixed polypropylene-based composites
✍ Irina Dubnikova; Evgeniya Kuvardina; Vadim Krasheninnikov; Sergey Lomakin; Igor 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 386 KB 👁 1 views

## Abstract The effect of multiwalled carbon nanotube (MWCNT) dimensions and surface modification on the morphology, mechanical reinforcement, and electrical properties of PP‐based composites, prepared by melt mixing, has been studied. The MWCNTs of small (__d__ < 10 nm) and large (__d__ = 40–60 nm