The preparation of carbon fiber-reinforced cement-based composites involved two-step dispersions of carbon fibers. Both steps affected greatly the mechanical properties of the composites. With the aid of ultrasonic wave, a new dispersant hydroxyethyl cellulose was used to help fiber dispersion in th
Effect of carbon fiber grade on the electrical behavior of carbon fiber reinforced cement
- Publisher
- Elsevier Science
- Year
- 2002
- Weight
- 183 KB
- Volume
- 43
- Category
- Article
- ISSN
- 0140-6701
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The effect of anodic oxidation on high-strength polyacrylonitrilebased carbon fibers has been studied in terms of fiber surface energetics and fracture toughness of the composites. According to contact angle measurements based on the wicking rate of a test liquid, anodic oxidation leads to an increa
The tensile strength, modulus and ductility of carbon fiber reinforced cement paste were increased by ozone treatment of the fibers prior to using the fibers. Increases were observed whether or not the paste contained methylcellulose/silica fume/latex. The ozone treatment involved exposure to O3 gas
The effect of carbon fibers on the tensile strength of cement paste matrix was experimentally and analytically investigated. The tensile strength values were obtained using the cementitious composites axial tensile technique (CCATr) [ 1,2]. The addition of 1, 1.5, 2, and 3 volume percent ofpolyacry
Self-monitoring of slight fatigue damage was demonstrated in cement mortar containing short carbon fibers (0.24 vol.%), as damage (occurring in the first < 10% of the tensile or compressive fatigue life) caused the volume electrical resistivity to decrease irreversibly by up to 2%. The greater the s