✦ LIBER ✦

Effect of bias and temperature on the bulk and surface properties of gold-containing plasma-polymerized fluorocarbons

✍ Scribed by R. d'Agostino; L. Martinů; V. Pische

Publisher: Springer
Year: 1991
Tongue: English
Weight: 472 KB
Volume: 11
Category: Article
ISSN: 0272-4324
DOI: 10.1007/bf01447031

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Plasma-based sterilization: Effect on su

Plasma-based sterilization: Effect on surface and bulk properties and hydrolytic stability of reprocessed polyurethane electrophysiology catheters

✍ Lerouge, S. ;Guignot, C. ;Tabrizian, M. ;Ferrier, D. ;Yagoubi, N. ;Yahia, L'H. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 289 KB 👁 2 views

The effects of synthesis and pretreatmen

The effects of synthesis and pretreatment conditions on the bulk structure and surface properties of zirconia

✍ Kyeong Taek Jung; Alexis T. Bell 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 689 KB

Effect of moisture and low temperatures

Effect of moisture and low temperatures on the properties of polymeric and composite materials

✍ T. A. Starzhenetskaya; I. N. Cherskii 📂 Article 📅 1987 🏛 Springer US 🌐 English ⚖ 357 KB

Effect of chemicothermal treatment on th

Effect of chemicothermal treatment on the structure and energy of the surface of metals and the bulk properties

✍ G. N. Dubinin 📂 Article 📅 1978 🏛 Springer US 🌐 English ⚖ 230 KB

A study on the plasma polymerization of

A study on the plasma polymerization of some cyano-containing compounds and their electrical properties

✍ Y. Osada; Q. S. Yu; H. Yasunaga; Y. Kagami; F. S. Wang; J. Chen 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 661 KB

Effect of saline exposure on the surface

Effect of saline exposure on the surface and bulk properties of medical grade silicone elastomers

✍ Kennan, J. J. ;Peters, Y. A. ;Swarthout, D. E. ;Owen, M. J. ;Namkanisorn, A. ;Ch 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 261 KB 👁 2 views

Medical-grade silicone elastomers were subjected to accelerated aging in saline to verify the hydrolytic stability of the elastomer. Tensile strength, elongation at break, and the elastomer stress measured at 100% or 200% elongation did not change significantly for peroxide-cured sheeting aged in 37