𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of asphaltenes on the hydraulic drag in pipelines with crude oil

✍ Scribed by A. Kh. Mirzadzhanzade; I. G. Bulina; A. K. Galyamov; N. M. Sherstnev; A. A. Nazarov


Publisher
Springer US
Year
1973
Tongue
English
Weight
189 KB
Volume
25
Category
Article
ISSN
1573-871X

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effects of Asphaltene Solvency on Stabil
✍ Joseph D. McLean; Peter K. Kilpatrick πŸ“‚ Article πŸ“… 1997 πŸ› Elsevier Science 🌐 English βš– 290 KB

The formation of stable and persistent emulsions and foams in contact hydrophilic materials, which then partition into the the production and refining of crude petroleum is a challenge aqueous droplets (10, 11). These desalter emulsions must which has defied broad and generic resolution for several

Investigations into asphaltenes in heavy
✍ Latif H. Ali; Khalid A. Al-Ghannam πŸ“‚ Article πŸ“… 1981 πŸ› Elsevier Science 🌐 English βš– 501 KB

Precipitation of asphaltenes by alkane solvents from the Qaiyarah heavy crude oil resulted in relatively higher yields under both cooling and solvent reflux temperature conditions as compared to room temperature. Resins occlusion in the cold precipitation conditions is suggested. From detailed eleme

Effects of crude oil and chemical disper
✍ C. B. Cook; A. H. Knap πŸ“‚ Article πŸ“… 1983 πŸ› Springer-Verlag 🌐 English βš– 734 KB

An eight-hour exposure of Diploria strigosa (Dana) to a mixture of Arabian Light crude oil (19ppm) and the chemical dispersant "Corexit 9527" (1 ppm) in a flowing seawater system reduced photosynthesis by symbiotic zooxanthellae by 85 %, while either oil or dispersant alone had no effect. The greate

The effect of demulsifiers on the interf
✍ R.A. Mohammed; A.I. Bailey; P.F. Luckham; S.E. Taylor πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 879 KB

The interfacial rheological properties of the crude oil-water interface have been measured. It is found that the rheological properties are time dependent and the film takes at least 8 h to attain equilibrium. During this period the surface elasticity and viscosity increase markedly with time, with