𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Economical and ecological cryogenic machining of AISI 304 austenitic stainless steel

✍ Scribed by Hong, S. Y. ;Broomer, M.

Publisher
Springer
Year
2000
Weight
267 KB
Volume
2
Category
Article
ISSN
1436-722X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Friction stir welding of AISI 304 austen
Friction stir welding of AISI 304 austenitic stainless steel
✍ C. Meran; V. Kovan; A. Alptekin πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 191 KB

## Abstract The objective of this work is to demonstrate the feasibility of friction stir welding (FSW) AISI 304 austenitic stainless steels. The tool used was formed of a tungsten‐based alloy. The specimens were welded on an 11 kW vertical milling machine. Defect‐free welds were produced on 2.5 mm

The fatigue behaviour of metastable (AIS
The fatigue behaviour of metastable (AISI-304) austenitic stainless steel wires
✍ M. Topic; R.B. Tait; C. Allen πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 402 KB

The fatigue behaviour of AISI 304 stainless steel has been investigated as a function of drawing strain. Both smooth and notched wire samples were subjected to three-point fatigue testing carried out under load control at room temperature. This study has established that approximately 20% of prior

Plasma nitriding of AISI 304 austenitic
Plasma nitriding of AISI 304 austenitic stainless steel with pre-shot peening
✍ Lie Shen; Liang Wang; Yizuo Wang; Chunhua Wang πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 943 KB

AISI 304 austenitic stainless steel was plasma nitrided at the temperature ranging from 410 to 520 Β°C with pre-shot peening. The structural phases, micro-hardness and electrochemical behavior of the nitrided layer were investigated by optical microscopy, X-ray diffraction, micro-hardness testing and