Dynamic response of naphthalene biodegradation in a continuous flow soil slurry reactor
✍ Scribed by Philip M. DiGrazia; J. M. Henry King; James W. Blackburn; Bruce A. Applegate; Paul R. Bienkowski; Barry L. Hilton; G. S. Sayler
- Publisher
- Springer Netherlands
- Year
- 1991
- Tongue
- English
- Weight
- 856 KB
- Volume
- 2
- Category
- Article
- ISSN
- 0923-9820
No coin nor oath required. For personal study only.
✦ Synopsis
Periodic perturbations were used to evaluate the system stability and robustness of naphthalene biodegradation in a continuous flow stirred tank reactor (CSTR) containing a soil slurry. The experimental design involved perturbing the test system using a sinusoidal input either of naphthalene or non-naphthalene organic carbon at different frequencies during steady state operation of the reactors. The response of the test system was determined by using time series off-gas analysis for naphthalene liquid phase concentration and degradation, total viable cell counts, and gene probe analysis of naphthalene degradative genotype, and by batch mineralization assays.
Naphthalene biodegradation rates were very high throughout the experimental run (95 to > 99% removed) resulting in very low or undetectable levels of naphthalene in the off-gas and reactor effluent. Attempts to reduce the rate of naphthalene biotransformation by either reducing the reactor temperature from 20°C to 10°C or the dissolved oxygen level (> 1 mg/L) were unsuccessful. Significant naphthalene biodegradation was observed at 4 ° C. While variable, the microbial community as measured by population densities was not significantly affected by temperature changes. In terms of naphthalene biotransformation, the system was able to adapt readily to all perturbations in the reactor.
📜 SIMILAR VOLUMES
## Based on a three-parameter model, the dynamic response of an isothermal two-phase continuous Bow stirred tank reactor with a first-order chemical reaction occurring in uniform spherical catalyst particles was obtained analytically by using the method of Laplace transforms. Three modes of input