𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dynamic mechanical properties of polystyrene-block-poly[ethylene-co-(ethylene-propylene)]-block-polystyrene triblock copolymer/hydrocarbon oil blends

✍ Scribed by Akihiro Nishioka; Yuji Aoki; Takaya Suzuki; Akira Ishigami; Tomohiro Endo; Tomonori Koda; Kiyohito Koyama


Publisher
John Wiley and Sons
Year
2011
Tongue
English
Weight
543 KB
Volume
121
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Blend systems of polystyrene‐block‐poly(ethylene‐co‐(ethylene‐propylene))‐block‐polystyrene (SEEPS) triblock copolymer with three types of hydrocarbon oil of different molecular weight were prepared. The E″ curves as a function of temperature exhibited two peaks; one peak at low temperature (≅ −50°C), arising from the glass transition of the poly[ethylene‐co‐(ethylene‐propylene)] (PEEP) phase and a high temperature peak (≅ 100°C), arising from the glass transition of the polystyrene (PS) phase. The glass transition temperature (T~g~) of the PEEP phase shifted to lower temperature with increasing oil content. The shifted T~g~ depended on the types of oil and was lower for the low molecular weight oil. The T~g~ of PS phase of the present blend system, were found to be constant and independent of the oil content, when molecular weight of the oil is high. However, for the lower molecular weight oil, the T~g~ of the PS phase also shifted to lower temperatures. This fact indicates that the oil of high molecular weight is merely dissolved in the PS phase. The E′ at (75°C, at which temperature both of PEEP and PS phases are in glassy state, was found to be independent of oil content. In contrast, at 25°C, at which temperature the PEEP phase is in rubbery state, the E′ decreased sharply with increasing oil content. This result indicates that the hydrocarbon oil was a selective solvent in the PEEP phase. It mainly dissolved in the PEEP phase, although slightly dissolved into the PS phase as well, when molecular weight of oil is low. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011


📜 SIMILAR VOLUMES


Physical gelation of polystyrene-block-p
✍ José R. Quintana; Esperanza Díaz; Issa Katime 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 471 KB

## Abstract The thermoreversible gelation of the triblock copolymer polystyrene‐__block__‐poly(ethylene/butylene)‐__block__‐polystyrene (SEBS2) in paraffinic oil was studied. The solvent used is selective for the middle PEB block of the copolymer. The thermal behaviour as a function of copolymer co

Dynamic Mechanical Properties of Poly(pr
✍ Antonietta Genovese; Robert A. Shanks 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 308 KB

## Abstract **Summary:** Blends of poly(propylene) (PP) were prepared with poly[ethylene‐__co__‐(methyl acrylate)] (EMA) having 9.0 and 21.5% methyl acrylate comonomer. A similar series of blends were compatibilized by using maleic anhydride grafted PP. The morphology and mechanical properties of t

Effect of diblock copolymers on morpholo
✍ Won Mook Choi; O Ok Park; Jae-Gon Lim 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 559 KB

## Abstract Interfacial agents are often used to compatibilize immiscible polymer blends. They are known to reduce the interfacial tension, homogenize the morphology, and improve adhesion between phases. In this study, two diblock copolymers of styrene/ethylene‐propylene (SEP), which have different