𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester composites

✍ Scribed by L. Uma Devi; S.S. Bhagawan; S. Thomas


Publisher
Society for Plastic Engineers
Year
2009
Tongue
English
Weight
885 KB
Volume
31
Category
Article
ISSN
0272-8397

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The dynamic mechanical properties of randomly oriented intimately mixed hybrid composites based on pineapple leaf fibers (PALF) and glass fibers (GF) in unsaturated polyester (PER) matrix were investigated. The PALFs have high‐specific strength and improve the mechanical properties of the PER matrix. In this study, the volume ratio of the two fibers was varied by incorporating small amounts of GF such as PALF/GF, 90/10, 80/20, 70/30, and 50/50, keeping the total fiber loading constant at 40 wt%. The dynamic modulus of the compositeswas found to increase on GF addition. The intimately mixed (IM) hybrid composites with PALF/GF, 80/20 (0.2 V~f~ GF) showed highest Eβ€² values and least damping. Interestingly, the impact strength of the composites was minimum at this volume ratio. The composites with 0.46 V~f~ GF or PALF/GF (50/50) showed maximum damping behavior and highest impact strength. The results were compared with hybrid composites of different layering patterns such as GPG (GF skin and PALF core) and PGP (PALF skin and GF core). IM and GPG hybrid composites are found more effective than PGP. The activation energy values for the relaxation processes in different composites were calculated. The overall results showed that hybridization with GF enhanced the performance properties. POLYM. COMPOS., 2010. Β© 2009 Society of Plastics Engineers


πŸ“œ SIMILAR VOLUMES


Mechanical properties of pineapple leaf
✍ L. Uma Devi; S. S. Bhagawan; Sabu Thomas πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 364 KB πŸ‘ 2 views

Pineapple leaf fiber (PALF) which is rich in cellulose, relatively inexpensive, and abundantly available has the potential for polymer reinforcement. The present study investigated the tensile, flexural, and impact behavior of PALF-reinforced polyester composites as a function of fiber loading, fibe

Dynamic mechanical properties of pineapp
✍ L. Uma Devi; S.S. Bhagawan; S. Thomas πŸ“‚ Article πŸ“… 2011 πŸ› Society for Plastic Engineers 🌐 English βš– 978 KB

## Abstract In the recent years, lignocellulosic fibers that originate from a renewable source have been found to provide good reinforcement in polymer matrices. Among the natural fibers, pineapple leaf fiber (PALF) exhibits excellent mechanical properties, besides possessing low density, high stif

Study of jute fiber reinforced polyester
✍ A. K. Saha; S. Das; D. Bhatta; B. C. Mitra πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 266 KB πŸ‘ 2 views

Cyanoethylation of jute fibers in the form of nonwoven fabric was studied, and these chemically modified fibers were used to make jute-polyester composites. The dynamic mechanical thermal properties of unsaturated polyester resin (cured) and composites of unmodified and chemically modified jute-poly

Dynamic mechanical analysis of fiber rei
✍ Katherine E. Reed πŸ“‚ Article πŸ“… 1980 πŸ› Society for Plastic Engineers 🌐 English βš– 522 KB

## Abstract Dynamic mechanical and thermal properties were determined for unidirectional epoxy/glass composites at various fiber orientation angles. Resonant frequency and relative logarithmic decrement were measured as functions of temperature. In low angle and longitudinal specimens, a transition