✦ LIBER ✦

Dynamic Fracture Characterization of Al2O3 and SiCw/Al2O3

✍ Scribed by Lyle R. Deobald; Albert S. Kobayashi

Book ID: 110825880
Publisher: John Wiley and Sons
Year: 1992
Tongue: English
Weight: 478 KB
Volume: 75
Category: Article
ISSN: 0002-7820
DOI: 10.1111/j.1151-2916.1992.tb05519.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effective fracture toughness in Al2O3–Al

Effective fracture toughness in Al2O3–Al2O3/ZrO2 laminates

✍ Tanja Lube; Javier Pascual; Francis Chalvet; Goffredo de Portu 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 723 KB

XPS Studies of characterized Cu/Al2O3, Z

XPS Studies of characterized Cu/Al2O3, Zn/Al2O3 and CuZn/Al2O3, catalysts

✍ Giuliano Moretti 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 525 KB

## Abstract By XPS it is confirmed that copper‐containing catalysts supported on alumina and calcined at high temperature (673–873 k for 24 h.), with or without zinc addition, have a ‘surface spinel’ structure. Combining the XPS results with previous results obtained by vis–UV reflectance spectros

Preparation and Characterization of FeCo

Preparation and Characterization of FeCo-Al2O3and Al2O3Aerogels

✍ Anna Corrias; Maria F. Casula; Andrea Falqui; Giorgio Paschina 📂 Article 📅 2004 🏛 Springer 🌐 English ⚖ 240 KB

Sintering behaviour and microstructures

Sintering behaviour and microstructures of Ti(Al,O)/Al2O3, Ti3Al(O)/Al2O3 and TiAl(O)/Al2O3 in situ composites

✍ Z.H. Cai; D.L. Zhang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 860 KB

Wet Milling of Fe/Al/Al2O3 and Fe2O3/Al/

Wet Milling of Fe/Al/Al2O3 and Fe2O3/Al/Al2O3 Powder Mixtures

✍ Silvia Schicker; Daniel E. García; Igor Gorlov; Rolf Janssen; Nils Claussen 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 898 KB

The K2O·Al2O3-Al2O3system

✍ J. S. Moya; E. Criado; S. Aza 📂 Article 📅 1982 🏛 Springer 🌐 English ⚖ 420 KB