This study examines the durability of self-consolidating lightweight aggregate concrete (SCLAC) made from dredged silt from reservoirs in South Taiwan by chloride penetration, electrical resistivity, and sodium sulfide solution. Analysis with a densified mixture algorithm demonstrates that a lower w
Durability of self-consolidating concrete using waste LCD glass
โ Scribed by Her-Yung Wang; Wen-Liang Huang
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 498 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0950-0618
No coin nor oath required. For personal study only.
โฆ Synopsis
This study investigates the properties of self-compacting glass concrete (SCGC), where liquid crystal glass sand (0%, 10%, 20%, and 30%) is used in place of aggregates. The results indicate that the slump flow of self-compacting glass concrete (SCGC) increases with higher glass sand content. Additionally, replacing 20% of the aggregates yields the highest compressive and flexural strengths. Self-compacting glass concrete has the highest ultrasonic pulse velocity. After 56 days, the electric resistivity is higher than 20 kX cm. Finally, when the volume of glass is increased to 30%, the amount of chloride ion penetration is reduced and the durability of the self-compacting glass concrete is improved.
๐ SIMILAR VOLUMES
The Taiwanese production of TFTโLCD front-panels comprises a global share of 43%, the highest production rate in the world. Inevitably, a large amount of waste is produced in the fabrication process. How to deal with waste LCD glass is an important work. In this study, the water-to-binder ratios wer
This paper presents results of an experimental work conducted on the use of foundry silica-dust in self-consolidating concrete (SCC). A control SCC mixture was made, in which ASTM C 618 Class C fly ash constituted 40 mass% of the total cementitious materials. Three more SCC mixtures were made using