𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dual-polarized shaped-beam printed antenna for airborne SAR applications

✍ Scribed by S. B. Sharma; Sanjeev Kulshrestha; Rajeev Jyoti; C. Sriharsha; B. K. Pandey


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
245 KB
Volume
44
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


This paper presents the design and development of a dual-polarized shaped-beam antenna for airborne synthetic aperture radar (SAR). A multilayer, stacked, printed antenna with electromagnetic coupling is chosen as the radiating element due to wide bandwidth and low cross polarization. Shaping in elevation plane is achieved by employing the null-perturbation technique in order to obtain complex excitation distribution. Many sets of coefficients giving the same power patterns were obtained and the set with the minimum current taper ratio was selected for realization of the antenna. A planar array of 8 ϫ 8 elements is designed and developed at the C band. The measured and simulated radiation patterns and returnloss performance are also presented.


📜 SIMILAR VOLUMES


Ultra-lightweight dual-polarized X-band
✍ Yu-Jiun Ren; Yan Zhang 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 226 KB 👁 1 views

## Abstract A dual‐polarized X‐band array antenna for advanced airborne weather hazard monitoring radar applications is presented. This low‐profile array is composed of 8 × 8 circular patch antenna elements with a hybrid feed‐line network providing dual‐polarization function and high isolation (∼40

ACS fed printed F-shaped uniplanar anten
✍ V. Deepu; R. Sujith; S. Mridula; C. K. Aanandan; K. Vasudevan; P. Mohanan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 396 KB 👁 1 views

## Abstract An asymmetric coplanar strip (ACS) fed dual band F‐shaped antenna covering the 2.4/5.2 GHz WLAN bands is presented. The optimized dimensions of the proposed uniplanar antenna are 21 mm × 19 mm when printed on a substrate of dielectric constant 4.4 and height 1.6 mm. The dual band nature

A new printed G-shaped monopole antenna
✍ Chien-Yuan Pan; Chien-Hsiang Huang; Tzyy-Sheng Horng 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB 👁 1 views

## Abstract A novel dual‐band printed G‐shaped monopole antenna is proposed. The antenna provides two resonant paths of different lengths (forming into a G‐shaped profile) in order to achieve 2.4‐ and 5.2‐GHz dual‐band operation for WLAN applications. Reasonably large impedance‐matching bandwidth a

Shaped beam printed antenna with wavegui
✍ S. B. Sharma; Sanjeev Kulshrestha; B. K. Pandey; D. K. Sharma; Rajeev Jyoti; S. 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 408 KB 👁 1 views

## Abstract This paper presents design and development of X band 8 × 32 element planar array, with center frequency at 9.65 GHz. Stacked microstrip patch antenna where the lower patch is directly fed by microstrip line has been used as a single radiating element. The complex excitation coefficients

An F-shaped printed monopole antenna for
✍ Jyoti Ranjan Panda; Rakhesh Singh Kshetrimayum 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 480 KB 👁 1 views

## Abstract A simple microstrip fed printed monopole antenna for the radio frequency identification (RFID) and wireless local area network (WLAN) is presented.The antenna has two different resonant current paths (forming an F‐shaped structure) that support two resonances at 2.44 and 5.18 GHz, which

New broadband dual-printed inverted L-sh
✍ Qinjiang Rao; Tayeb A. Denidni 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB 👁 1 views

## Abstract A broadband printed monopole antenna is proposed for digital communication systems (DCS‐1800), personal communication services (PCS1900), and international mobile telecommunication (IMT‐2000) tri‐band mobile devices. The proposed antenna is composed of two inverted L‐shaped monopoles, a