## Abstract This article proposes the design of tunable dual‐band filters for multiband multistandard systems, specifically for wireless local‐area network applications. The two main goals are to provide frequency tunability in the second band while maintaining the first band fixed and to obtain a
Dual-band bandpass filter with tunable upper passband
✍ Scribed by Li-Ying Feng; Hong-Xing Zheng; Cheng-Guang Sun; Dan Cheng
- Book ID
- 102950758
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 523 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A microstrip dual‐band bandpass filter is developed in this article. Using a pair of square open‐loops coupled with a symmetric ladder‐shaped resonator, frequencies of this filter are operated at 1.57 and 2.45 GHz. The lower resonance frequency is decided by the length of the square resonators, and the higher one is done by the ladder‐shaped resonator. Therefore, both frequency and bandwidth of the upper passband can be controlled flexibly, whereas those of the lower band are fixed. Finally, a filter is fabricated based on the design topology. Measured results have shown very good performance of the filter. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:888–890, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25866
📜 SIMILAR VOLUMES
## Abstract A dual‐mode bandpass filter with a high selective performance for dual‐band application is presented in this article.The filter is designed with square loop resonator with tree‐shaped patches attached to the four inner corners of the loop, which equivalents to load capacitors in the inn
## Abstract A new dual‐band bandpass filter featuring flexible frequency choice is proposed.It consists of two resonators out of the two sides of the signal line with different sizes forming two passbands with desired frequency responses and bandwidths. For the resonator forming the lower passband,
## Abstract In this letter, we proposed the design of novel dual‐band bandpass filter (BPF) with a broad upper rejection band using only two asymmetric stepped impedance resonators (SIRs), which has a smaller circuit size in comparison of previous works. The feature of the asymmetric SIR is only on