✦ LIBER ✦

Drying step for introduction of water-free desorption solvent into a gas chromatograph after on-line liquid chromatographic trace enrichment of aqueous samples

✍ Scribed by Jolan J. Vreuls; Rudy T. Ghijsen; Gerhardus J. de Jong; Udo A.Th. Brinkman

Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 751 KB
Volume: 625
Category: Article
ISSN: 1873-3778
DOI: 10.1016/0021-9673(92)85208-b

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On-line solid phase extraction - thermal

On-line solid phase extraction - thermal desorption for introduction of large volumes of aqueous samples into a gas chromatograph

✍ Vreuls, Jolan J. ;Th. Brinkman, Udo A. ;de Jong, Gerhardus J. ;Grob, Konrad ;Art 📂 Article 📅 1991 🏛 John Wiley and Sons 🌐 English ⚖ 521 KB

## Abstract A new approach to the introduction of large aqueous samples into a gas chromatograph, solid phase extraction ‐ thermal desorption, is presented. Carrier gas pushes the sample through a packed liner mounted in a programmed temperature vaporizer; analytes retained by the packing material

Liquid chromatographic trace enrichment

Liquid chromatographic trace enrichment with on-line capillary gas chromatography for the determination of organic pollutants in aqueous samples

✍ Noroozian, E. ;Maris, F. A. ;Nielen, M. W. F. ;Frei, R. W. ;de Jong, G. J. ;Th. 📂 Article 📅 1987 🏛 John Wiley and Sons 🌐 English ⚖ 760 KB

Trace enrichment for the GC analysis of a series of chlorinated pesticides and polychlorinated biphenyls (PCBs) in aqueous samples has been achieved through a simple on-line technique involving sorption on an LC micro-precolumn followed by direct elution into a gas chromatograph with hexane. A 5-m r

On-line solid-phase extraction/thermal d

On-line solid-phase extraction/thermal desorption for introduction of large volumes of aqueous samples into a capillary gas chromatograph: Part 2

✍ Jolan J. Vreuls; Gerhardus J. De Jong; Rudy T. Ghijsen; Udo A. Th. Brinkman 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 747 KB

## Abstract A module for combined solid‐phase extraction and thermal desorption (SPETD) was incorporated into a system for automated GC analysis. Solid‐phase extraction of analytes from water could be carried out after injection of an aqueous sample of 100 μL either by a loop using the carrier gas