Droplet size control with methanol-repellent surface in a sampling device for continuous annular electrochromatography
✍ Scribed by Qi Wang; Evgeny V. Rebrov; Volker Hessel
- Book ID
- 102447664
- Publisher
- John Wiley and Sons
- Year
- 2012
- Tongue
- English
- Weight
- 461 KB
- Volume
- 35
- Category
- Article
- ISSN
- 1615-9306
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The eluent droplet size defines the number of sampling compartments in a continuously operated annular electrochromatograph and therefore influences separation efficiency. In this work, an assembly of two capillaries, a feeding capillary on the top and a receiving capillary placed under it, has been investigated to control droplet size. The receiving capillary prevents the liquid droplet formation beyond a critical size, which reduces the volume of sampling compartment as compared with the case of the electrolyte flow driven solely by gravity. With a receiving capillary, the electrolyte droplet size was reduced from 1.5 to 0.46 mm. Further decrease of droplet size was not possible due to a so‐called droplet jump upwards effect which has been observed on a hydrophilic glass surface with water. A typical electrolyte used in CAEC has high methanol content. In an attempt to improve the methanol‐repellent properties of the glass surface, two approaches have been implemented: (i) self‐assembled chemisorbed monolayers of an alkylsiloxane and (ii) fabrication of a nano‐pin film. The methanol‐repellent surface of the feeding capillary suppressed the droplet jump upwards effect. The surface remained methanol repellent in different solutions with lower polarity than that of water.