✦ LIBER ✦

Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites

✍ Scribed by Hossein Izadi; Adrian P. Gerlich

Book ID: 113514691
Publisher: Elsevier Science
Year: 2012
Tongue: English
Weight: 774 KB
Volume: 50
Category: Article
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2012.06.012

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Rheology and processability of multi-wal

Rheology and processability of multi-walled carbon nanotubes—ABSE polycarbosilazane composites

✍ Sylvia Kokott; Lutz Heymann; Günter Motz 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 628 KB

An inexpensive method has been found to produce ceramic SiCN-fibres via the precursor route consisting of five processing steps: synthesis of the polymer, preparation of the spinning mass, melt-spinning, curing via electron beam and subsequent pyrolysis at 1100 • C in a nitrogen atmosphere. A specia

Properties of single and dual matrix alu

Properties of single and dual matrix aluminum–carbon nanotube composites processed via spark plasma extrusion (SPE)

✍ K. Morsi; A.M.K. Esawi; P. Borah; S. Lanka; A. Sayed; M. Taher 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 456 KB

Processing and properties of aligned mul

Processing and properties of aligned multi-walled carbon nanotube/aluminoborosilicate glass composites made by sol–gel processing

✍ Geoffrey Otieno; Antal A. Koos; Frank Dillon; Andrew Wallwork; Nicole Grobert; R 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 475 KB

We describe a novel sol-gel based approach for producing aluminoborosilicate glass composites containing continuous, aligned carbon nanotubes. The process involves the production of aligned carbon nanotubes (ACNT) via aerosol chemical vapour deposition (CVD), followed by infiltration of the ACNT wit

Melt processing and mechanical property

Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films

✍ Wenzhong Tang; Michael H Santare; Suresh G Advani 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 831 KB

High density polyethylene (HDPE) was used as the matrix material for a carbon nanotube (CNT) polymer composites. This combination of composite constituents has not been previously reported in the literature. Multi-wall carbon nanotube (MWNT) / HDPE composite films were fabricated using the melt proc

Effect of processing methods and functio

Effect of processing methods and functional groups on the properties of multi-walled carbon nanotube filled poly(dimethyl siloxane) composites

✍ Kong, K. T. S.; Mariatti, M.; Rashid, A. A.; Busfield, J. J. C. 📂 Article 📅 2012 🏛 Springer 🌐 English ⚖ 1006 KB

Concise route to styryl-modified multi-w

Concise route to styryl-modified multi-walled carbon nanotubes for polystyrene matrix and enhanced mechanical properties and thermal stability of composite

✍ Xianhong Chen; Feng Tao; Jianfeng Wang; Huajun Yang; Jiagui Zou; Xiaohua Chen; X 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 1002 KB

Effective functionalization of multi-walled carbon nanotubes (MWCNTs) with styryl group was carried out via the esterification reaction of the carboxylate salt of carbon nanotubes and 4-vinylbenzyl chlorides in toluene. The functionalized MWCNTs were characterized through FTIR and Raman spectra to c