Penicillin G (Pen G) can be rapidly extracted in hollow-fiber liquid-liquid contactors using N-lauryl-N-trialkylmethylamine (Amberlite LA-2) as the extractant. n-Butylacetate is much better than decanol as a diluent for such an extraction, although decanol can give a partition coefficient four times
Distillation in hollow fibers
โ Scribed by Guoliang Zhang; E. L. Cussler
- Publisher
- American Institute of Chemical Engineers
- Year
- 2003
- Tongue
- English
- Weight
- 194 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0001-1541
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
Distillation in hollow fibers can give better, more productive separations than distillation in random or structured packing. Since the hollow fibers used have little resistance to mass transfer, the selectivity of the separation depends on the relative volatility, just as in conventional distillation. Because the fibers are nonporous, the distillation can operate at high flows which normally cause flooding, and at low flows which normally compromise loading. As a result, the turndown ratio is nearly infinite and the height of a transfer unit can be as small as desired. Experiments do give values consistent with correlations developed for other membrane modules, although the practical value of hollow fiber distillation is uncertain because of the materials limitations.
๐ SIMILAR VOLUMES
## Abstract Chitosan hollow fibers were produced by wet spinning, taking advantage of the unique rheological properties of highly viscous chitosan solutions in acetic acid. The mechanical and separation properties of hollow fibers were tested. The mechanical properties were determined by measuring