𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Dispersion polymerization of styrene in alcohol media: Effect of initiator concentration, solvent polarity, and temperature on the rate of polymerization

✍ Scribed by Chien-Hsien Ho; Show-An Chen; Michael D. Amiridis; J. W. Van Zee


Publisher
John Wiley and Sons
Year
1997
Tongue
English
Weight
184 KB
Volume
35
Category
Article
ISSN
0887-624X

No coin nor oath required. For personal study only.

✦ Synopsis


The effects of three different variables (initiator concentration, polarity of the solvent and reaction temperature) on the rate of dispersion polymerization of styrene in alcohols have been investigated. It was found that the rate of polymerization increases with the initiator (AIBN) concentration at the 0% conversion level and becomes independent of it at higher monomer conversions. More significant was the result that the rate was also found to increase with solvent polarity. This is consistent with thermodynamic equilibrium calculations which account for the partitioning behavior of monomer and solvent in both the solution and the particle phases. The results further suggest the existence of two different kinetic regions: one at low conversions, where the reaction takes place primarily in the solution phase, and one at high conversions, where the reaction takes place primarily in the particle phase.


πŸ“œ SIMILAR VOLUMES


Effect of solvent on the rate constants
✍ Timothy F. Mckenna; A. Villanueva; A. M. Santos πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 337 KB πŸ‘ 1 views

An experimental study was performed to estimate the value of the lumped kinetic constant k p /k t 0.5 . This quantity was evaluated using the well-known conversion vs. time approach in dilute solutions using both azo-bis-isobutyronitrile and benzoyl peroxide (AIBN and BPO), and two different solvent

Effect of solvent on the rate constants
✍ Timothy F. Mckenna; A. Villanueva πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 256 KB πŸ‘ 1 views

Measurements were made of the value of the lumped kinetic constant k p /k t 0.5 of vinyl acetate in different solvents and with different initiators. This quantity was evaluated using the well-known conversion vs. time approach in dilute solutions using both azo-bis-isobutyronitrile and benzoyl pero

Effect of temperature on styrene emulsio
✍ Ignac Capek; Shi-Yow Lin; Tien-Jung Hsu; Chorng-Shyan Chern πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 203 KB πŸ‘ 2 views

The batch emulsion polymerization kinetics of styrene initiated by a watersoluble peroxodisulfate at different temperatures in the presence of sodium dodecyl sulfate was investigated. The curves of the polymerization rate versus conversion show two distinct nonstationary-rate intervals and a shoulde