✦ LIBER ✦

Dislocation Configurations in an Extruded ZK60 Magnesium Alloy

✍ Scribed by B. Li; E. Ma; K.T. Ramesh

Book ID: 107443628
Publisher: The Minerals, Metals & Materials Society
Year: 2008
Tongue: English
Weight: 778 KB
Volume: 39
Category: Article
ISSN: 1073-5623
DOI: 10.1007/s11661-008-9621-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

High cycle fatigue behavior of as-extrud

High cycle fatigue behavior of as-extruded ZK60 magnesium alloy

✍ W. C. Liu; J. Dong; P. Zhang; Z. Y. Yao; C. Q. Zhai; W. J. Ding 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 712 KB

Superplasticity in a ZK60 magnesium allo

Superplasticity in a ZK60 magnesium alloy at low temperatures

✍ Hiroyuki Watanabe; Toshiji Mukai; Kenji Higashi 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 213 KB

Correlation of plastic deformation and d

Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60

✍ A Galiyev; R Kaibyshev; G Gottstein 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 835 KB

Factors influencing superplastic behavio

Factors influencing superplastic behavior in a magnesium ZK60 alloy processed by equal-channel angular pressing

✍ Roberto B. Figueiredo; Terence G. Langdon 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 663 KB

Solute segregation and texture modificat

Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium

✍ N. Stanford; G. Sha; J.H. Xia; S.P. Ringer; M.R. Barnett 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 390 KB

The development of superplastic ductilit

The development of superplastic ductilities and microstructural homogeneity in a magnesium ZK60 alloy processed by ECAP

✍ Roberto B. Figueiredo; Terence G. Langdon 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 212 KB

An extruded ZK60 magnesium alloy was processed by equal-channel angular pressing (ECAP) and then tested in tension at elevated temperatures. The results show the alloy is superplastic at a testing temperature of 473 K with an optimum ductility of ∼1310% when using an initial strain rate of 2.0 × 10