✦ LIBER ✦

Direct measurements of grain size in low-carbon steels using the laser ultrasonic technique

✍ Scribed by S. Sundin; D. Artymowicz

Book ID: 107439215
Publisher: The Minerals, Metals & Materials Society
Year: 2002
Tongue: English
Weight: 153 KB
Volume: 33
Category: Article
ISSN: 1073-5623
DOI: 10.1007/s11661-002-0131-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Characterization of Grain Size and Yield

Characterization of Grain Size and Yield Strength in AISI 301 Stainless Steel Using Ultrasonic Attenuation Measurements

✍ M. Aghaie-Khafri, F. Honarvar, S. Zanganeh 📂 Article 📅 2012 🏛 Springer-Verlag 🌐 English ⚖ 718 KB

Kinetics of the change in the size of au

Kinetics of the change in the size of austenite grains in low-carbon steel after deformation at high temperatures

✍ I. N. Dryukova; Yu. S. Tomenko 📂 Article 📅 1974 🏛 Springer US 🌐 English ⚖ 531 KB

Effect of the Grain Size and Deformation

Effect of the Grain Size and Deformation Substructure of Austenite on the Crystal Geometry of Bainite and Martensite in Low-Carbon Steels

✍ Zolotarevskii, N. Yu.; Zisman, A. A.; Panpurin, S. N.; Titovets, Yu. F.; Golosie 📂 Article 📅 2014 🏛 Springer US 🌐 English ⚖ 451 KB

Comparative measurements of the stress s

Comparative measurements of the stress state in a rolled carbon steel using magnetic Barkhausen noise and ultrasonic method

✍ Yonka Ivanova, Todor Partalin 📂 Article 📅 2012 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 859 KB

The application and research of high-fre

The application and research of high-frequency ultrasonic reflection technique used in the measurement of small diameter’s tube cavity size

✍ Wang, Mingquan; Han, Deshui; Li, Shilin 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 429 KB

Implications of specimen preparation and

Implications of specimen preparation and of surface contamination for the measurement of the grain boundary carbon concentration of steels using x-ray microanalysis in an UHV FESTEM

✍ Cousens, D. R.; Wood, B. J.; Wang, J. Q.; Atrens, A. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 161 KB 👁 1 views

The purpose of the present investigation was to gain an understanding of the nature of the carbon contamination on the surface of standard steel transmission electron spectroscopy (TEM) specimens, the effect of exposure of a clean specimen to normal laboratory air, and the efficacy of plasma-cleanin