An experimental investigation of the flexible blade/gravure roll coating operation is presented for a wide range of operating conditions. The film thickness is measured with an infrared gauge and the data reveal two regions of constant film thickness. At low capillary number (Ca i 0.3). the film thi
Direct gravure roll coating
β Scribed by H. Benkreira; R. Patel
- Publisher
- Elsevier Science
- Year
- 1993
- Tongue
- English
- Weight
- 570 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0009-2509
No coin nor oath required. For personal study only.
β¦ Synopsis
AMrae-Direct gravure roll coating has been studied experimentally over a wide range of operating conditions using an infrared gauge to measure the thickness of film transferred onto a substrate. For the three gravure geometries used, the dimensionless film thickness (film thickness/cell volume/cell wetted area) first increases with increasing Reynolds number(substrate speed x descriptive cell size x density/viscosity) but reaches rapidly a constant value of about l/3. Changes in the speed ratio (substrate/roller) from 0.5 to 2.0 do not affect this limiting value. The results also show the ability of trihelical and pyramidal cell configurations to empty better at low Reynolds number than quadrangular geometries. This work provides a comprehensive set of experimental data describing this important coating operation, usually carried out at large speeds ( > 2 m/s) and with low-viscosity liquids, i.e. large Re.
π SIMILAR VOLUMES
The Galerkin finite element method of solution formulated by Coyle et al. is applied to analyse the coating flow field between two reverse rotating rolls. A wide range of operating conditions that are of practical importance were studied. Many quantitative results that can benefit a practising engin
## Abstrae -Experimental measurements are reported for the flow of Newtonian liquids through the nip of two coand counter-rotating rolls of various size and speed ratios. Results are presented in a dimensionless form for the
## Abstract Coating process is an important step in the manufacturing of different products, such as paper, adhesive and magnetic tapes, photographic films, and many other. The tensioned web roll coating is one the several methods used by different industries. It relies on the elastohydrodynamic ac