✦ LIBER ✦

Direct CH4 fuel cell using Sr2FeMoO6 as an anode material

✍ Scribed by Zhiming Wang; Ye Tian; Yongdan Li

Publisher: Elsevier Science
Year: 2011
Tongue: English
Weight: 957 KB
Volume: 196
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2011.03.053

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Sr2Fe4/3Mo2/3O6 as anodes for solid oxid

Sr2Fe4/3Mo2/3O6 as anodes for solid oxide fuel cells

✍ Guoliang Xiao; Qiang Liu; Xihui Dong; Kevin Huang; Fanglin Chen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 275 KB

Sr 2 Fe 4/3 Mo 2/3 O 6 has been synthesized by a combustion method in air. It shows a single cubic perovskite structure after being reduced in wet H 2 at 800 • C and demonstrates a metallic conducting behavior in reducing atmospheres at mediate temperatures. Its conductivity value at 800 • C in wet

Synthesis and electrical properties of A

Synthesis and electrical properties of Al-doped Sr2MgMoO6-δ as an anode material for solid oxide fuel cells

✍ Zhixiang Xie; Hailei Zhao; Ting Chen; Xiong Zhou; Zhihong Du 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 781 KB

Electrical conductivity Double perovskite structure a b s t r a c t Aluminum doped Sr 2 MgMoO 6-d (SMMO) was synthesized via citrate-nitrate route. Dense samples of Sr 2 Mg 1-x Al x MoO 6Àd (0 x 0.05) were prepared by sintering the pellets at 1500 C in air and then reducing at 1300 C in 5%H 2 /Ar. T

Ce0.9Sr0.1VOx (x = 3, 4) as an

Ce0.9Sr0.1VOx (x = 3, 4) as anode materials for H2S-containing CH4 fueled solid oxide fuel cells

✍ Nemanja Danilovic; Jing-Li Luo; Karl T. Chuang; Alan R. Sanger 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 991 KB

The stability and activity in 0.5% H 2 S-CH 4 of Ce 0.9 Sr 0.1 VO 3 and Ce 0.9 Sr 0.1 VO 4 anode materials for H 2 Scontaining CH 4 fueled SOFCs have been determined. XRD showed that Ce 0.9 Sr 0.1 VO 4 was reduced when the fuel gas was 0.5% H 2 S-CH 4 , while Ce 0.9 Sr 0.1 VO 3 remained stable over

Evaluation of Sr0.88Y0.08TiO3–CeO2 as co

Evaluation of Sr0.88Y0.08TiO3–CeO2 as composite anode for solid oxide fuel cells running on CH4 fuel

✍ Xiufu Sun; Shaorong Wang; Zhenrong Wang; Jiqin Qian; Tinglian Wen; Fuqiang Huang 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 501 KB

Synthesis of Dendritic Nano-Sized Nickel

Synthesis of Dendritic Nano-Sized Nickel for use as Anode Material in an Alkaline Membrane Fuel Cell

✍ S. J. Ewing; R. Lan; X. X. Xu; S. W. Tao 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 199 KB

## Abstract Dendritic nano‐sized nickel nanoparticles were synthesised using a hydrazine reduction method in ethylene glycol from a nickel chloride precursor. The resulting particles were characterised by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and Transmission Electron Microsco

Flame Spray Synthesis of Nanoscale La0.6

Flame Spray Synthesis of Nanoscale La0.6Sr0.4Co0.2Fe0.8O3–δ and Ba0.5Sr0.5Co0.8Fe0.2O3–δ as Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells

✍ A. Heel; P. Holtappels; P. Hug; T. Graule 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 842 KB

One of the primary scientific aims within the solid oxide fuel cell (SPOFC) community is to lower the operating temperature of an SOFC system from about 800-1,000 °C to intermediate temperatures of about 600 °C [1]. The lower operating temperature decreases thermal stress in the materials and offers