Dimensional stabilization of wood with water soluble fire retardant bulking chemicals compared with polyethylene glycol-1000

✍ Scribed by Alfred J. Stamm

• Publisher: Springer
• Year: 1974
• Tongue: English
• Weight: 419 KB
• Volume: 8
• Category: Article
• ISSN: 0043-7719
• DOI: 10.1007/bf00351863

✦ Synopsis

Mono and diammonium acid phosphate, ammonium sulfamate, and sodium silicate were compared with polyethylene glycol-1000 as bulking dimension stabilizing agents using Engelmann spruce cross sectional wafers. Limiting antiswell efficiencies are equal to the volume fraction of chemical in a saturated solution. The experimental antiswell efficiencies due to bulking are the percent increase in the dry cross sectional area of the wafers caused by deposition of dry chemical within the cell walls divided by the percent swelling in water. These values for the phosphates, the sulfamate, and the polyethylene glycol approach the limiting values from solubility indicating that chemical continues to diffuse into the cell walls as the wood is dried to virtually attain a saturated solution within that structure. The sodium silicate gave an apparent negative antiswell efficiency as collapse of the fibers on drying exceeded the actual bulking. Antiswell efficieneies between 0 and 30% relative humidity, 0 and 90% relative humidity and 30 and 90~o relative humidity were in generM still lower. This is largely due to the treated systems taking up more water than the controls, especially at the higher relative humidity. Antiswell efficiencies for the mono ammonium acid phosphate ranged from 20 to 27~o, for the diammonium acid phosphate from 28 to 37~o, the ammonium sulfamate from 51 to 66~o and the polyethylene glycol from 63 to 77~o.