## Abstract A novel optically controlled HTS (high temperature superconducting) microwave variable attenuator was proposed and a sample was tested, which can be used solely, or be integrated into the HTS system. Utilizing the very low microwave superficial resistance and superexcellent optically re
Digitally controlled programmable high-speed variable optical attenuator
✍ Scribed by Sailu Li; Xiaofeng Jin; Xianmin Zhang; Yingyin Kevin Zou
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 111 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A digital closed‐loop controlled variable optical attenuator (VOA) module using an FPGA (Field Programmable Gate Array) chip for optical‐power‐fluctuation suppression is demonstrated in this paper. A VOA based on transparent electro‐optical ceramic, OptoCeramic® PLZT, is used to provide high‐speed optical power control. With logarithm amplifiers and A‐D‐A feedback circuitry, this VOA module could be designed to operate as either an attenuator or a power controller. The module can be used to filter out the optical power fluctuation up to 300 kHz. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 1019–1021, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21588
📜 SIMILAR VOLUMES
## Abstract A high‐dynamic‐range variable optical attenuator (VOA) using a movable shutter, which moves in a tilted‐angle direction to the collimate fiber pair, is proposed. The VOA operates in the C+L band with the advantages low cost, high dynamic range of more than 50 dB, low insertion loss of 0
## Abstract A novel variable optical attenuator (VOA) based on high‐birefringence (HiBi) fiber‐loop mirror is proposed. The HiBi fiber‐loop mirror is put into the temperature‐controlling box. As the temperature increases, the transmission spectrum shifts with nearly unaltered shape. The attenuation
Recently there has been an increasing demand for optical disk drives to have higher speed as well as high information density, especially for applications like CD-ROM drives. To this end improvement of their optical pickup structure and control is recognized as a very challenging issue. In this pape
dition. The reflection boundary condition (RBC) and the absorbing boundary condition (ABC) are examples of such velocity boundaries that have been investigated with the problem of synthesizing a rectangular deep null in the sidelobe region. The obtained results show that by using an RBC or ABC, and