✦ LIBER ✦

Diffusivity of Solutes Measured in Glass Capillaries Using Taylor's Analysis of Dispersion and a Commercial CE Instrument

✍ Scribed by Sharma, Upma; Gleason, Nathaniel J.; Carbeck, Jeffrey D.

Book ID: 126117249
Publisher: American Chemical Society
Year: 2005
Tongue: English
Weight: 144 KB
Volume: 77
Category: Article
ISSN: 0003-2700
DOI: 10.1021/ac048846z

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Use of Taylor-Aris Dispersion for Measur

Use of Taylor-Aris Dispersion for Measurement of a Solute Diffusion Coefficient in Thin Capillaries

✍ Bello, M. S.; Rezzonico, R.; Righetti, P. G. 📂 Article 📅 1994 🏛 American Association for the Advancement of Scienc 🌐 English ⚖ 305 KB

Development and validation of a new setu

Development and validation of a new setup for measurements of diffusion coefficients in ternary mixtures using the Taylor dispersion technique

✍ Sechenyh, Vitaliy; Legros, Jean-Claude; Shevtsova, Valentina 📂 Article 📅 2013 🏛 Elsevier Science 🌐 French ⚖ 441 KB

A capillary electrophoresis chip for the

A capillary electrophoresis chip for the analysis of print and film photographic developing agents in commercial processing solutions using indirect fluorescence detection

✍ Somsak Sirichai; Andrew J. de Mello 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 218 KB 👁 1 views

Shuttling device for high-resolution mea

Shuttling device for high-resolution measurements of relaxation and related phenomena in solution at low field, using a shared commercial 500 MHz NMR instrument

✍ Alfred G. Redfield 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 361 KB

## Abstract An apparatus is described that can pneumatically move an aqueous liquid NMR sample sealed in a 5 or 8 mm standard tube, from the center of a standard Varian 500 MHz spectrometer and probe out to any position in its fringe field, and back, under computer control. Applications to low‐fiel

Comparison of two letter sorting worksta

Comparison of two letter sorting workstations using postural analysis and subjective measures : Simmons, M S and Parsons, C A In Contemporary Ergonomics 1991, E J Lovesey (Ed). Taylor & Francis, London, 1991, pp 26–31 10 refs

📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 132 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB