Dielectric and physico-mechanical properties of butyl rubber loaded with some white fillers
β Scribed by Hanna, Faika F. ;Yehia, Abbas A. ;Hakim, Itedal K. ;Bishai, Augenie M. ;Saad, Azima L. G.
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1983
- Tongue
- English
- Weight
- 186 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0007-1641
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The permittivity Π and dielectric loss Π for different ratios of an ethylene propylene diene monomer (EPDM)-chloroprene rubber (CR) blend ranging from 0 to 100 phr were measured over a frequency range from 400 Hz to 60 kHz. The measurements were carried out at room temperature (25Β°C). The values of
A systematic dielectric study over a frequency range from 400 to 10 MHz was carried out on natural rubber and chloroprene rubber with a small amount of nitroaniline additives. Three absorption regions were obtained as a result of the analysis of the curves relating dielectric loss k with frequency.
## Abstract Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially d