Die Verzunderung von Heißgasleitungswerkstoffen für ein luftgekühltes Sonnenturmkraftwerk bei wechselnder Temperaturbelastung zwischen 623 und 1073 K
✍ Scribed by Dipl.-Phys(TH) J. Ebberink; INTERATOM; Dipl.-Ing. (FH) G. Höulmann
- Publisher
- John Wiley and Sons
- Year
- 1983
- Tongue
- German
- Weight
- 935 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
✦ Synopsis
Es wird das Verzunderungsverhalten zweier hitzebestandiger Stahle X 12 CrNi 25 21 (1.4845) und X 10 NiCrAlTi 32 20 (1.4876) in Luft als zukiinftige Werkstoffe fur HeiBgasleitungen eines gasgekiihlten Sonnenturmkraftwerkes untersucht. Die maximale Betriebstemperatur betragt bei Sonneneinstrahlung 1073 K und bei Wolkenabschattung bzw. uber Nacht minimal 623 K. Die Werkstoffe eines solchen luftgekuhlten Kraftwerkeqsind wechselnden Temperaturbeanspruchungen mit Temperaturgradienten von < 7 Ws und Luftgeschwindigkeiten von 25 m/s ausgesetzt. Die Zyklenzahl betragt bis zu 6000 Zyklen pro Jahr.
Der Versuchsaufbau zur Simulation dieser zyklischen Temperaturbelastung wird vorgestellt und uber thermisch zyklische Auslagerungsversuche berichtet. Zur Untersuchung des Zunderaufbaus, des Zundenvachstums und dessen Haftung am Grundmaterial wurden bis zu 7000 Temperaturzyklen nit 0. g. Temperaturgradienten gefahren.
Die Nachuntersuchungen der ausgelagerten Proben zeigen das bessere Verzunderungsverhalten von X 12 CrNi 25 21 sowohl bei isothermer als auch bei thermisch-zyklischer Auslagerung.
The corrosion behaviour of two heat resistant alloys X 12 CrNi 25 21 (1.4845) and X 10NiCrAlTi3220 (1.4876) is studied. These alloys are model alloys for hot air pipes of a gas cooled solar tower power station.
The maximum operating temperature is 1073 K (solar operation), the minimum is 623 K (fossil operation) during cloudy periods and at night.
The experimental simulation device for cyclic temperature exposure between 623 K and 1073 K is described and experimental results are discussed.
After 7000 cycles with the tempeature gradient of < 7 K/s growth, composition and adherence of corrosion layers on the materials are determined.
The post examinations of the exposed specimens show the better corrosion behaviour of X 12 CrNi25 21 not only after isothermal exposure at 1073 K but also after thermal cyclic exposure between 623 and 1073 K.