✦ LIBER ✦

Die design in the extrusion of hollow copper sections using the model-material technique

✍ Scribed by Hannu Pihlainen; Seppo Kivivuori; Heikki Kleemola

Publisher: Elsevier Science
Year: 1985
Weight: 715 KB
Volume: 12
Category: Article
ISSN: 0378-3804
DOI: 10.1016/0378-3804(85)90136-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Comments on the use of the model-materia

Comments on the use of the model-material technique in the hot forging of brass

✍ Bo Anulf; Dick Lindqvist; Curt Lundin 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 544 KB

Three-section symmetrical 3-dB direction

Three-section symmetrical 3-dB directional coupler in multilayer microstrip technology designed with the use of multi-technique compensation

✍ Krzysztof Wincza; Slawomir Gruszczynski 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 417 KB

## Abstract A broadband high‐performance three‐section symmetrical 3‐dB directional coupler designed in a microstrip multilayer technology has been presented for the first time. To achieve excellent properties of the directional coupler a novel approach has been applied in which three different com

The use of recently developed experiment

The use of recently developed experimental methods and modelling techniques to study crack propagation in viscoelastic materials

✍ J.P. Dear; E.Q. Clutton; A.D. Channell 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 455 KB

Two novel techniques have been applied to the problem of determining the fracture toughness of polyethylene appropriate to the situation of rapid crack propagation in pipe systems. Agreement is found between the data from the two methods used for evaluating four grades of polyethylene of widely diff

In-situ determination of macroscopic the

In-situ determination of macroscopic thermal neutron absorption cross-section of borehole model materials using the integrated flux method : S. A. Menn & H. E. Hall Jr, Nuclear Geophysics, 9(1), 1995, pp 45–54

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 259 KB