✦ LIBER ✦

Development of novel cost effective hybrid ply carbon-fibre composites

✍ Scribed by S.A. Hitchen; R.M.J. Kemp

Book ID: 107935274
Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 794 KB
Volume: 56
Category: Article
ISSN: 0266-3538
DOI: 10.1016/0266-3538(96)00064-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Development of novel silk/wool hybrid fi

Development of novel silk/wool hybrid fibre polypropylene composites

✍ Govindaraju Rajkumar, Jagannathan Srinivasan… 📂 Article 📅 2013 🏛 Iran Polymer and Petrochemical Institute 🌐 English ⚖ 523 KB

Development of flax/carbon fibre hybrid

Development of flax/carbon fibre hybrid composites for enhanced properties

✍ Dhakal, H.N.; Zhang, Z.Y.; Guthrie, R.; MacMullen, J.; Bennett, N. 📂 Article 📅 2013 🏛 Elsevier Science 🌐 English ⚖ 579 KB

Effects of fibre length on tensile stren

Effects of fibre length on tensile strength of carbon/glass fibre hybrid composites

✍ M. Miwa; N. Horiba 📂 Article 📅 1994 🏛 Springer 🌐 English ⚖ 450 KB

The effect of fibre sizing on fibres and

The effect of fibre sizing on fibres and bundle strength in hybrid glass carbon fibre composites

✍ C MARSTON; B GABBITAS; J ADAMS 📂 Article 📅 1997 🏛 Springer 🌐 English ⚖ 874 KB

Advanced Composite Materials for Automot

Advanced Composite Materials for Automotive Applications (Structural Integrity and Crashworthiness) || Development of Low-Cost Carbon Fibre for Automotive Applications

✍ Elmarakbi, Ahmed 📂 Article 📅 2013 🏛 John Wiley & Sons Ltd ⚖ 511 KB

The effect of voids on the flexural fati

The effect of voids on the flexural fatigue performance of unidirectional carbon fibre composites developed for wind turbine applications

✍ A.R. Chambers; J.S. Earl; C.A. Squires; M.A. Suhot 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 1000 KB

The influence of voids in the initiation and propagation of static flexural and flexural fatigue failures of unidirectional carbon fibre composite was investigated. Vacuum pressure in the vacuum bag oven cure process was varied to produce void levels in the range 0.5-6%. The voids were characterised