✦ LIBER ✦

Development of highly porous titanium scaffolds by selective laser melting

✍ Scribed by Yan Wang; Yifu Shen; Zhiyang Wang; Jialin Yang; Ning Liu; Wenrong Huang

Book ID: 113793366
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 768 KB
Volume: 64
Category: Article
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2009.12.035

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In-Situ Formation of Titanium Boride and

In-Situ Formation of Titanium Boride and Titanium Carbide by Selective Laser Melting

✍ Timo Kühnle; Knut Partes 📂 Article 📅 2012 🏛 Elsevier 🌐 English ⚖ 638 KB

Production of highly porous titanium (Ti

Production of highly porous titanium (Ti) scaffolds by vacuum-assisted foaming of titanium hydride (TiH2) suspension

✍ Ahn, Min-Kyung; Jo, In-Hwan; Koh, Young-Hag; Kim, Hyoun-Ee 📂 Article 📅 2014 🏛 Elsevier Science 🌐 English ⚖ 946 KB

The development of a scanning strategy f

The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting

✍ R. Stamp; P. Fox; W. O’Neill; E. Jones; C. Sutcliffe 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 727 KB

Development of composite porous scaffold

Development of composite porous scaffolds based on poly(lactide-co-glycolide)/nano-hydroxyapatite via selective laser sintering

✍ Cijun Shuai, Bo Yang, Shuping Peng, Zheng Li 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 493 KB

Development and characterization of a co

Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting

✍ Flege, Christian; Vogt, Felix; HÃ¶ges, Simon; Jauer, Lucas; Borinski, Mauricio; 📂 Article 📅 2012 🏛 Springer 🌐 English ⚖ 966 KB

Selective Laser Melting: A regular unit

Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications

✍ Lewis Mullen; Robin C. Stamp; Wesley K. Brooks; Eric Jones; Christopher J. Sutcl 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 788 KB

## Abstract In this study, a novel porous titanium structure for the purpose of bone in‐growth has been designed, manufactured and evaluated. The structure was produced by Selective Laser Melting (SLM); a rapid manufacturing process capable of producing highly intricate, functionally graded parts.