✦ LIBER ✦

Development and Test of 10.5 kV/1.5 kA HTS Fault Current Limiter

✍ Scribed by Hui, D.; Wang, Z.K.; Zhang, J.Y.; Zhang, D.; Dai, S.T.; Zhao, C.H.; Zhu, Z.Q.; Li, H.D.; Zhang, Z.F.; Guan, Y.; Xiao, L.Y.; Lin, L.Z.; Li, L.F.; Gong, L.H.; Xu, X.D.; Lu, J.Z.; Fang, Z.; Zhang, H.X.; Zeng, J.P.; Li, G.P.; Zhou, S.Z.

Book ID: 120812338
Publisher: IEEE
Year: 2006
Tongue: English
Weight: 880 KB
Volume: 16
Category: Article
ISSN: 1051-8223
DOI: 10.1109/TASC.2006.871209

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Field Test and Demonstrated Operation of

Field Test and Demonstrated Operation of 10.5 kV/1.5 kA HTS Fault Current Limiter

✍ Li, L. F.; Gong, L. H.; Xu, X. D.; Lu, J. Z.; Fang, Z.; Zhang, H. X. 📂 Article 📅 2007 🏛 IEEE 🌐 English ⚖ 516 KB

6.6 kV/1.5 kA-class superconducting faul

6.6 kV/1.5 kA-class superconducting fault current limiter development

✍ Ito, D.; Yoneda, E.S.; Tsurunaga, K.; Tada, T.; Hara, T.; Ohkuma, T.; Yamamoto, 📂 Article 📅 1992 🏛 IEEE 🌐 English ⚖ 331 KB

Development of 6.6kV/1.5kA-class superco

Development of 6.6kV/1.5kA-class superconducting fault current limiter

✍ Daisuke Ito; Kazuyuki Tsurunaga; Takamitu Tada; Tsukusi Hara; Takeshi Ohkuma; Ta 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 284 KB

The Development and Performance Test of

The Development and Performance Test of a 10 kV Resistive Type Superconducting Fault Current Limiter

✍ Hong, Z.; Sheng, J.; Zhang, J.; Lin, B.; Ying, L.; Li, Y.; Jin, Z. 📂 Article 📅 2012 🏛 IEEE 🌐 English ⚖ 827 KB

Design and test results of 6.6 kV high-T

Design and test results of 6.6 kV high-Tc superconducting fault current limiter

✍ Yazawa, T.; Yoneda, E.; Matsuzaki, J.; Shimada, M.; Kuriyama, T.; Nomura, S.; Oh 📂 Article 📅 2001 🏛 IEEE 🌐 English ⚖ 502 KB

Design, fabrication techniques and test

Design, fabrication techniques and test results of 1.2 kV/80 A inductive fault current limiter by using conduction-cooled system

✍ Hyoungku Kang; Seungje Lee; Duck Kweon Bae; Min Cheol Ahn; Tae Kuk Ko 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 668 KB

An inductive superconducting fault current limiter protects power system by limiting the amplitude of fault current by the inductance of its dc reactor. Therefore, it is very important to design the dc reactor of high critical current prior to fabrication. At first, the optimal design parameters wer