𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Determination of the strength of the bond of polymer coatings with solid surfaces by the method of symmetric delamination

✍ Scribed by V. I. Pavlov; V. D. Galich; R. A. Veselovskii

Publisher
Springer US
Year
1993
Tongue
English
Weight
324 KB
Volume
28
Category
Article
ISSN
1573-8922

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of bond coat surface rough
The influence of bond coat surface roughness on chemical failure and delamination in TBC systems
✍ M. P. Taylor; W. M. Pragnell; H. E. Evans πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 German βš– 340 KB

## Abstract Localised loss of aluminium from the bond coat within thermal barrier coating (TBC) systems is a critical factor determining the lifetime of these coatings. In this paper, it will be demonstrated that electroplated MCrAlY bond coats with asperities of high aspect ratios can experience p

Changes in the pore character of silicas
Changes in the pore character of silicas caused by surface bonding and polymer coating
✍ Sergey S. Hayrapetyan; Uwe D. Neue; Hambardzum G. Khachatryan πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 823 KB

## Abstract The pore character of packings for liquid chromatography, especially reversed‐phase (RPLC) packings, has been studied by means of the nitrogen adsorption method (BET method). Micro‐spherical silica gels with 9, 12, 30, 40 and 50 nm average pore diameter have been used as carriers. These