## Abstract The linear polarization, polarization resistance, threepoint and CORFIT method have been used to determine polarization resistance values for 4130 Steel in inhibited HCl. From the three‐point and the CORFIT method the corrosion current and the Tafel slopes are obtained directly. A compa
Determination of the polarization resistance from impedance measurements
✍ Scribed by Dr. Florian Mansfeld; Dr. M. W. Kendig
- Publisher
- John Wiley and Sons
- Year
- 1983
- Tongue
- German
- Weight
- 481 KB
- Volume
- 34
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract Commonly used electrochemical methods of determination of characteristic potentials for pitting are briefly described and compared. The possibility to predict an “absolute” and/or relative pitting resistance of a material from measurements of the characteristic potentials is discussed.
A method of predicting seat transmissibility from mathematical models of the seat and the human body is described. The complex dynamic stiffness of a seat is determined by measurement using an indenter rig, and its stiffness and damping subsequently determined by curve-fitting. By using the fitted s
The generally accepted strategy of neglecting the polar nature of halogenated liquids in the surface energy determination using the Lifshitz-van der Waals/Lewis acid-base (LW/AB) approach may lead to erroneous and inconsistent results for polar solids. This was demonstrated in a simulation study car
## Abstract The paper deals with a two‐electrode instrument for polarization resistance measurements. During its development and designing the last theoretical and experimental achievements have been taken in account. The block‐diagram of the instrument is described in details and the principle of
## Abstract A new, nickel‐coated graphite resistance‐change‐based method for gel‐point determination for epoxy‐based thermoset resins is presented and compared with DSC and rheological methods. Gelation times determined by this new method are in very good agreement with conventional techniques; thi